您的位置:首頁>>新聞中心>>上海潔凈室車間安裝高藤牌快速門。

上海潔凈室車間安裝高藤牌快速門。

上海潔凈室車間安裝高藤牌快速門。

來源:|作者:gaotengmen|發布時間: 2019-07-27|次瀏覽

上海潔凈室車間安裝高藤牌快速門。 
Gaoteng Fast Door is installed in Shanghai Clean Room Workshop. 
上海潔凈室車間安裝高藤牌快速門?!靖咛匍T業】定制報價:常經理,0513-88380079,13818597388.專業生產PVC快速門,工業提升門,冷庫快速門,硬質快速門,快速堆積門,潔凈室快速門的優質廠家。

上海潔凈室車間安裝高藤牌快速門。
Gaoteng Fast Door is installed in Shanghai Clean Room Workshop.

快速門廠家www.gaotengmen.com
快速卷簾門廠家www.713942.buzz

Basic Standards for Installation of PVC Fast Rolling Curtain Doors
There are many installation standards for PVC fast curtain doors, which vary from manufacturer to manufacturer. Generally speaking, the basic standards for installing PVC fast rolling shutter doors are as follows:
1. Fast doors must be horizontal, horizontal and vertical, and must be on the horizontal line.
2. Installation and fixing of fast rolling shutter door should be firm and reliable, screw should be tightened in place, should not be tightened.
3. Fast shutter door control box, radar, motor and other components need to be carried out in accordance with the standards and specifications. If necessary, the PVC pipe must be inserted and the cable head should not be exposed.
4. The upper and lower parts of the guide rail must be fixed rather than fixed.
5. The range of radar adjustment should not be too close to avoid door failure. The installation position of safe infrared ray should be maintained on the horizontal line, and the horizontal line should not be inconsistent.
6. In the process of installing fast curtain door PVC fast curtain door, if we find that the fast curtain door has different sizes, the quality of the door is insufficient, and does not meet the site installation requirements, it is necessary to communicate with the relevant personnel in time, and communication can not be handled. The leadership of the company should be responded to immediately.


PVC
快速卷簾門安裝的基本標準

PVC快速卷簾門有許多安裝標準,安裝標準因制造商而異。一般來說,安裝PVC快速卷簾門的基本標準,具體內容如下:

1,快速門門保證水平,水平和垂直,必須在水平線上。

2??焖倬砗熼T的安裝和固定應牢固可靠,螺釘應擰緊到位,不應有松緊。

3,快速卷簾門控制箱,雷達,電機等組件需要按標準規范進行。如有必要,必須插入PVC管,并且不應暴露電纜頭。

4。導軌的上部和下部必須固定而不是固定。

5,雷達調節范圍不要太近,以免造成門體故障。安全紅外線的安裝位置應保持在水平線上,不得出現水平線不一致。

6。在安裝快速卷簾門PVC快速卷簾門的過程中,如果發現快速門有不同的尺寸,門的質量不夠,不符合現場安裝要求等,有必要及時與相關人員溝通,和溝通無法處理。應該立即回應公司的領導。


 

聯系方式

您的需要就是我們努力的方向!

電話:021-37820097 021-37820079
手機:13818597388 13564378713
郵箱:[email protected]
地址:上海市松江區港業路558號12幢

我要留言

姓名

手機

郵箱

地址

留言

捕鱼大亨手机版下载k 河南十一选五开奖分布图 北京时时彩开奖官网 河北十一选五前三直 七乐彩2020 55125彩吧论坛首页 金牛配资网 上海时时乐历史 河南快三走势图万能码 同花顺手机炒股软件怎么查看银证 东方六十1今天开奖